SlsEiger Tango device

This is the reference documentation of the Sls Eiger Tango device.

Properties

Property name	Default value	Type	Description
ConfigFileName	N/A	String	Configuration files used during the camera instanciation.
ExpertReadoutTime	0.00004 (40µs)	Double	Readout time in seconds of the camera.
ExpertReceiverFifoDepth	8000	ULong	Number of frames in the receiver memory.
ExpertFramePacketNumber8	32	ULong	Number of packet for each received frame part in bit depth 8 bits.
ExpertFramePacketNumber16	64	ULong	Number of packet for each received frame part in bit depth 16 bits.
ExpertFramePacketNumber32	128	ULong	Number of packet for each received frame part in bit depth 32 bits.
ExpertLiveModeMinFramePeriodSec	1.0	Double	Minimum period in seconds between frames for the live mode.

Attributes

Attribute name	Read/Write	Type	Description
clockDivider	R/W	String	Change the readout clock. Available clock dividers : FULL_SPEED (equivalent to the 0 sls value) HALF_SPEED (equivalent to the 1 sls value) QUARTER_SPEED (equivalent to the 2 sls value) SUPER_SLOW_SPEED (currently not used)
parallelMode	R/W	String	Change the parallel mode. Available modes : NON_PARALLEL PARALLEL SAFE
overflowMode	R/W	Boolean	When activated, shows saturated for overflow in subframes in 32 bits mode.
subFrameExposureTime	R/W	Double	Set sub frame exposure time for 32 bits mode.
gainMode	R/W	String	Change the gain mode. Available modes : STANDARD LOW (currently not used) MEDIUM (currently not used) HIGH (currently not used) VERY_HIGH (currently not used)
thresholdEnergy	R/W	Long	Set/Get threshold energy for modules in eV.
countRateCorrectionActivation	R/W	Boolean	Set/Get count rate correction activation value.
countRateCorrection	R	Long	Get count rate correction in ns. When the count rate correction is disabled, the value will be 0.
gapPixelsActivation	R/W	Boolean	Set/Get gap pixels management activation value.
edgePixelsCorrection	R/W	Double	Set/Get correction value for edge pixels (double in size).
cornerPixelsCorrection	R/W	Double	Set/Get correction value for corner pixels (four-times the normal size).
configFileName	R	String	Configuration files used during the camera instanciation.
detectorFirmwareVersion	R	String	Get detector firmware version.
detectorSoftwareVersion	R	String	Get detector software version.
tempFpga1	R	Long	Get temperature of hardware element (fpga) for first module in millidegree Celsius.
tempFpga2	R	Long	Get temperature of hardware element (fpga) for second module in millidegree Celsius.
tempFpgaext1	R	Long	Get temperature of hardware element (close to the fpga) for first module in millidegree Celsius.
tempFpgaext2	R	Long	Get temperature of hardware element (close to the fpga) for second module in millidegree Celsius.
temp10ge1	R	Long	Get temperature of hardware element (close to the 10GE) for first module in millidegree Celsius.
temp10ge2	R	Long	Get temperature of hardware element (close to the 10GE) for second module in millidegree Celsius.
tempDcdc1	R	Long	Get temperature of hardware element (close to the dc dc converter) for first module in millidegree Celsius.
tempDcdc2	R	Long	Get temperature of hardware element (close to the dc dc converter) for second module in millidegree Celsius.
tempSodl1	R	Long	Get temperature of hardware element (close to the left so-dimm memory) for first module in millidegree Celsius.
tempSodl2	R	Long	Get temperature of hardware element (close to the left so-dimm memory) for second module in millidegree Celsius.
tempSodr1	R	Long	Get temperature of hardware element (close to the right so-dimm memory) for first module in millidegree Celsius.
tempSodr2	R	Long	Get temperature of hardware element (close to the right so-dimm memory) for second module in millidegree Celsius.
tempFpgafl1	R	Long	Get temperature of hardware element (left front end board fpga) for first module in millidegree Celsius.
tempFpgafl2	R	Long	Get temperature of hardware element (left front end board fpga) for second module in millidegree Celsius.
tempFpgafr1	R	Long	Get temperature of hardware element (right front end board fpga) for first module in millidegree Celsius.
tempFpgafr2	R	Long	Get temperature of hardware element (right front end board fpga) for second module in millidegree Celsius.

Commands

Command name	Arg. in	Arg. out	Description
Init	Void	Void	Do not use
State	Void	Long	Return the device state
Status	Void	String	Return the device state as a string
SetCmd	String	String	Allow to execute a line command (set type)
GetCmd	String	String	Allow to execute a line command (get type)