PrincetonCCD Tango C++ device

This is the reference documentation of the PrincetonCCD Tango C++ device.

You can also find some useful information about the camera models/prerequisite/installation/configuration/compilation in the PrincetonCCD camera plugin section.

Properties

Property name	Default value	Type	Description
DetectorNum		String	Identifier of the camera (0..nb total cameras declared in the system. It can be retrieved from WinView32)
TemperatureTargetAtInit	DEFAULT	String	Define which Temperature must be used at init device DEFAULT : use DefaultTemperatureTarget value MEMORIZED : use MemorizedTemperatureTarget value
DefaultTemperatureTarget	-110	Double	Define the Temperature Target of the Cooler at Init device Used only if TemperatureTargetAtInit = DEFAULT. (Degree Celsius)
MemorizedTemperatureTarget	-110	Double	Define the Temperature Target of the Cooler at Init device Used only if TemperatureTargetAtInit = MEMORIZED. (Degree Celsius)

Attributes

Attribute name	Read/Write	Type	Description
internalAcquisitionMode	R/W	String	Available Internal Acquisition Modes are : STANDARD FOCUS
shutterMode	R/W	String	Available Shutter Modes are : OPEN_NEVER OPEN_PRE_EXPOSURE OPEN_NO_CHANGE
temperature	R	Double	The current temperature (Degree Celsius)
temperatureTarget	R/W	Double	Define the target temperature (Degree Celsius)
gain	R/W	Ushort	Define the gain
currentRate	R	String	Display the current ADC frequency in Mhz

Commands

Command name	Arg. in	Arg. out	Description
Init	Void	Void	Do not use
State	Void	Long	Return the device state
Status	Void	String	Return the device state as a string
SetADCMode	UShort Available values are : 0 –> 1 MHz 1 –> 100 KHz	Void	Define the ADC frequency