Dhyana Tango C++ device¶

This is the reference documentation of the Dhyana Tango C++ device.

This camera can manage 3 trigger modes : INTERNAL_SINGLE, EXTERNAL_MULTI, EXTERNAL_GATE

This camera can manage ROI

This camera can’t manage Binning

Properties¶

Property name

Default value

Type

Description

__ExpertTimerPeriod

1

UShort

Timer period (in ms)

Useful only for Internal Trigger

Attribute name	Read/Write	Type	Description
tucamVersion	R	String	Get Tucam Library Version.
temperature	R	Double	Get Temperature of the detector (in Celsius)
temperatureTarget	W	Double	Set the Temperature target of the detector (in Celsius)
fanSpeed	R/W	UShort	Define the fan speed of the detector [0..5]
globalGain	R/W	String	Define the gain of the detector [LOW, HIGH, HDR]
fps	R/W	Double	Get frame rate value
channel1	R/W	Enum	Set trigger output mode (ExposureStart, Readout, Global) on channel 1
channel2	R/W	Enum	Set trigger output mode (ExposureStart, Readout, Global) on channel 2
channel3	R/W	Enum	Set trigger output mode (ExposureStart, Readout, Global) on channel 3
width1	R/W	Double	Set width value option on channel 1 mode
width2	R/W	Double	Set width value option on channel 2 mode
width3	R/W	Double	Set width value option on channel 3 mode
delay1	R/W	Double	Set delay value option on channel 1 mode
delay2	R/W	Double	Set delay value option on channel 2 mode
delay3	R/W	Double	Set delay value option on channel 3 mode
edge1	R/W	Enum	Set edge option value (Rising, Failing) on channel 1 mode
edge2	R/W	Enum	Set edge option value (Rising, Failing) on channel 2 mode
edge3	R/W	Enum	Set edge option value (Rising, Failing) on channel 3 mode

Command name	Arg. in	Arg. out	Description
Init	Void	Void	Do not use (Use Init of the Generic device)
State	Void	Long	Return the device state
Status	Void	String	Return the device state as a string